#ifndef __LINUX_KVM_H
#define __LINUX_KVM_H
/*
* Userspace interface for /dev/kvm – kernel based virtual machine
*
* Note: you must update KVM_API_VERSION if you change this interface.
*/
#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/ioctl.h>
#include <asm/kvm.h>
#define KVM_API_VERSION 12
/* *** Deprecated interfaces *** */
//已经不用的接口
#define KVM_TRC_SHIFT 16
#define KVM_TRC_ENTRYEXIT (1 << KVM_TRC_SHIFT)
#define KVM_TRC_HANDLER (1 << (KVM_TRC_SHIFT + 1))
#define KVM_TRC_VMENTRY (KVM_TRC_ENTRYEXIT + 0x01)
#define KVM_TRC_VMEXIT (KVM_TRC_ENTRYEXIT + 0x02)
#define KVM_TRC_PAGE_FAULT (KVM_TRC_HANDLER + 0x01)
#define KVM_TRC_HEAD_SIZE 12
#define KVM_TRC_CYCLE_SIZE 8
#define KVM_TRC_EXTRA_MAX 7
#define KVM_TRC_INJ_VIRQ (KVM_TRC_HANDLER + 0x02)
#define KVM_TRC_REDELIVER_EVT (KVM_TRC_HANDLER + 0x03)
#define KVM_TRC_PEND_INTR (KVM_TRC_HANDLER + 0x04)
#define KVM_TRC_IO_READ (KVM_TRC_HANDLER + 0x05)
#define KVM_TRC_IO_WRITE (KVM_TRC_HANDLER + 0x06)
#define KVM_TRC_CR_READ (KVM_TRC_HANDLER + 0x07)
#define KVM_TRC_CR_WRITE (KVM_TRC_HANDLER + 0x08)
#define KVM_TRC_DR_READ (KVM_TRC_HANDLER + 0x09)
#define KVM_TRC_DR_WRITE (KVM_TRC_HANDLER + 0x0A)
#define KVM_TRC_MSR_READ (KVM_TRC_HANDLER + 0x0B)
#define KVM_TRC_MSR_WRITE (KVM_TRC_HANDLER + 0x0C)
#define KVM_TRC_CPUID (KVM_TRC_HANDLER + 0x0D)
#define KVM_TRC_INTR (KVM_TRC_HANDLER + 0x0E)
#define KVM_TRC_NMI (KVM_TRC_HANDLER + 0x0F)
#define KVM_TRC_VMMCALL (KVM_TRC_HANDLER + 0x10)
#define KVM_TRC_HLT (KVM_TRC_HANDLER + 0x11)
#define KVM_TRC_CLTS (KVM_TRC_HANDLER + 0x12)
#define KVM_TRC_LMSW (KVM_TRC_HANDLER + 0x13)
#define KVM_TRC_APIC_ACCESS (KVM_TRC_HANDLER + 0x14)
#define KVM_TRC_TDP_FAULT (KVM_TRC_HANDLER + 0x15)
#define KVM_TRC_GTLB_WRITE (KVM_TRC_HANDLER + 0x16)
#define KVM_TRC_STLB_WRITE (KVM_TRC_HANDLER + 0x17)
#define KVM_TRC_STLB_INVAL (KVM_TRC_HANDLER + 0x18)
#define KVM_TRC_PPC_INSTR (KVM_TRC_HANDLER + 0x19)
struct kvm_user_trace_setup {
__u32 buf_size;
__u32 buf_nr;
};
#define __KVM_DEPRECATED_MAIN_W_0x06 \
_IOW(KVMIO, 0x06, struct kvm_user_trace_setup)
#define __KVM_DEPRECATED_MAIN_0x07 _IO(KVMIO, 0x07)
#define __KVM_DEPRECATED_MAIN_0x08 _IO(KVMIO, 0x08)
#define __KVM_DEPRECATED_VM_R_0x70 _IOR(KVMIO, 0x70, struct kvm_assigned_irq)
struct kvm_breakpoint {
__u32 enabled;
__u32 padding;
__u64 address;
};
struct kvm_debug_guest {
__u32 enabled;
__u32 pad;
struct kvm_breakpoint breakpoints[4];
__u32 singlestep;
};
#define __KVM_DEPRECATED_VCPU_W_0x87 _IOW(KVMIO, 0x87, struct kvm_debug_guest)
/* *** End of deprecated interfaces *** */
//hsq
/* for KVM_CREATE_MEMORY_REGION */
struct kvm_memory_region {
__u32 slot;
__u32 flags;
__u64 guest_phys_addr;
__u64 memory_size; /* bytes */
};
/* for KVM_SET_USER_MEMORY_REGION */
struct kvm_userspace_memory_region {
__u32 slot;
__u32 flags;
__u64 guest_phys_addr;
__u64 memory_size; /* bytes */
__u64 userspace_addr; /* start of the userspace allocated memory */
};
/*
* The bit 0 ~ bit 15 of kvm_memory_region::flags are visible for userspace,
* other bits are reserved for kvm internal use which are defined in
* include/linux/kvm_host.h.
*/
#define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0)
#define KVM_MEM_READONLY (1UL << 1)
/* for KVM_IRQ_LINE */
struct kvm_irq_level {
/*
* ACPI gsi notion of irq.
* For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
* For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
* For ARM: See Documentation/virtual/kvm/api.txt
*/
union {
__u32 irq;
__s32 status;
};
__u32 level;
};
struct kvm_irqchip {
__u32 chip_id;
__u32 pad;
union {
char dummy[512]; /* reserving space */
#ifdef __KVM_HAVE_PIT
struct kvm_pic_state pic;
#endif
#ifdef __KVM_HAVE_IOAPIC
struct kvm_ioapic_state ioapic;
#endif
} chip;
};
/* for KVM_CREATE_PIT2 */
struct kvm_pit_config {
__u32 flags;
__u32 pad[15];
};
#define KVM_PIT_SPEAKER_DUMMY 1
//hsq，kvm退出的25种原因
#define KVM_EXIT_UNKNOWN 0
#define KVM_EXIT_EXCEPTION 1
#define KVM_EXIT_IO 2
#define KVM_EXIT_HYPERCALL 3
#define KVM_EXIT_DEBUG 4
#define KVM_EXIT_HLT 5
#define KVM_EXIT_MMIO 6
#define KVM_EXIT_IRQ_WINDOW_OPEN 7
#define KVM_EXIT_SHUTDOWN 8
#define KVM_EXIT_FAIL_ENTRY 9
#define KVM_EXIT_INTR 10
#define KVM_EXIT_SET_TPR 11
#define KVM_EXIT_TPR_ACCESS 12
#define KVM_EXIT_S390_SIEIC 13
#define KVM_EXIT_S390_RESET 14
#define KVM_EXIT_DCR 15 /* deprecated */
#define KVM_EXIT_NMI 16
#define KVM_EXIT_INTERNAL_ERROR 17
#define KVM_EXIT_OSI 18
#define KVM_EXIT_PAPR_HCALL 19
#define KVM_EXIT_S390_UCONTROL 20
#define KVM_EXIT_WATCHDOG 21
#define KVM_EXIT_S390_TSCH 22
#define KVM_EXIT_EPR 23
#define KVM_EXIT_SYSTEM_EVENT 24
//hsq,kvm退出的3种内部原因
/* For KVM_EXIT_INTERNAL_ERROR */
/* Emulate instruction failed. */
//仿真指令失败
#define KVM_INTERNAL_ERROR_EMULATION 1
/* Encounter unexpected simultaneous exceptions. */
//遇到无法预料的模拟异常
#define KVM_INTERNAL_ERROR_SIMUL_EX 2
/* Encounter unexpected vm-exit due to delivery event. */
//因为发送事件导致打的退出异常
#define KVM_INTERNAL_ERROR_DELIVERY_EV 3
/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */
struct kvm_run {
/* in */
__u8 request_interrupt_window;//往VCPU中发出一个中断插入请求，让VCPU做好相关的准备工作
__u8 padding1[7];
/* out */
__u32 exit_reason;//退出原因
__u8 ready_for_interrupt_injection;//响应request_interrupt_windows中的中断请求，当此位有效时，说明可以进行中断
__u8 if_flag;
__u8 padding2[2];
/* in (pre_kvm_run)退出之前, out (post_kvm_run)退出之后 */
__u64 cr8;
__u64 apic_base;
#ifdef __KVM_S390
/* the processor status word for s390 */
__u64 psw_mask; /* psw upper half */
__u64 psw_addr; /* psw lower half */
#endif
union {
/* KVM_EXIT_UNKNOWN */
struct {
__u64 hardware_exit_reason;
} hw;
/* KVM_EXIT_FAIL_ENTRY */
struct {
__u64 hardware_entry_failure_reason;
} fail_entry;
/* KVM_EXIT_EXCEPTION */
struct {
__u32 exception;
__u32 error_code;
} ex;
/* KVM_EXIT_IO */
struct {
#define KVM_EXIT_IO_IN 0
#define KVM_EXIT_IO_OUT 1
__u8 direction;
__u8 size; /* bytes */
__u16 port;
__u32 count;
__u64 data_offset; /* relative to kvm_run start */
} io;
struct {
struct kvm_debug_exit_arch arch;
} debug;
/* KVM_EXIT_MMIO */
struct {
__u64 phys_addr;
__u8 data[8];
__u32 len;
__u8 is_write;
} mmio;
/* KVM_EXIT_HYPERCALL */
struct {
__u64 nr;
__u64 args[6];
__u64 ret;
__u32 longmode;
__u32 pad;
} hypercall;
/* KVM_EXIT_TPR_ACCESS */
struct {
__u64 rip;
__u32 is_write;
__u32 pad;
} tpr_access;
/* KVM_EXIT_S390_SIEIC */
struct {
__u8 icptcode;
__u16 ipa;
__u32 ipb;
} s390_sieic;
/* KVM_EXIT_S390_RESET */
#define KVM_S390_RESET_POR 1
#define KVM_S390_RESET_CLEAR 2
#define KVM_S390_RESET_SUBSYSTEM 4
#define KVM_S390_RESET_CPU_INIT 8
#define KVM_S390_RESET_IPL 16
__u64 s390_reset_flags;
/* KVM_EXIT_S390_UCONTROL */
struct {
__u64 trans_exc_code;
__u32 pgm_code;
} s390_ucontrol;
/* KVM_EXIT_DCR (deprecated) */
struct {
__u32 dcrn;
__u32 data;
__u8 is_write;
} dcr;
struct {
__u32 suberror;
/* Available with KVM_CAP_INTERNAL_ERROR_DATA: */
__u32 ndata;
__u64 data[16];
} internal;
/* KVM_EXIT_OSI */
struct {
__u64 gprs[32];
} osi;
struct {
__u64 nr;
__u64 ret;
__u64 args[9];
} papr_hcall;
/* KVM_EXIT_S390_TSCH */
struct {
__u16 subchannel_id;
__u16 subchannel_nr;
__u32 io_int_parm;
__u32 io_int_word;
__u32 ipb;
__u8 dequeued;
} s390_tsch;
/* KVM_EXIT_EPR */
struct {
__u32 epr;
} epr;
/* KVM_EXIT_SYSTEM_EVENT */
struct {
#define KVM_SYSTEM_EVENT_SHUTDOWN 1
#define KVM_SYSTEM_EVENT_RESET 2
__u32 type;
__u64 flags;
} system_event;
/* Fix the size of the union. */
char padding[256];
};
/*
* shared registers between kvm and userspace.
* kvm_valid_regs specifies the register classes set by the host
* kvm_dirty_regs specified the register classes dirtied by userspace
* struct kvm_sync_regs is architecture specific, as well as the
* bits for kvm_valid_regs and kvm_dirty_regs
*/
__u64 kvm_valid_regs;
__u64 kvm_dirty_regs;
union {
struct kvm_sync_regs regs;
char padding[1024];
} s;
};
/* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */
struct kvm_coalesced_mmio_zone {
__u64 addr;
__u32 size;
__u32 pad;
};
struct kvm_coalesced_mmio {
__u64 phys_addr;
__u32 len;
__u32 pad;
__u8 data[8];
};
struct kvm_coalesced_mmio_ring {
__u32 first, last;
struct kvm_coalesced_mmio coalesced_mmio[0];
};
#define KVM_COALESCED_MMIO_MAX \
((PAGE_SIZE – sizeof(struct kvm_coalesced_mmio_ring)) / \
sizeof(struct kvm_coalesced_mmio))
/* for KVM_TRANSLATE */
struct kvm_translation {
/* in */
__u64 linear_address;
/* out */
__u64 physical_address;
__u8 valid;
__u8 writeable;
__u8 usermode;
__u8 pad[5];
};
/* for KVM_INTERRUPT */
struct kvm_interrupt {
/* in */
__u32 irq;
};
/* for KVM_GET_DIRTY_LOG */
struct kvm_dirty_log {
__u32 slot;
__u32 padding1;
union {
void __user *dirty_bitmap; /* one bit per page */
__u64 padding2;
};
};
/* for KVM_SET_SIGNAL_MASK */
struct kvm_signal_mask {
__u32 len;
__u8 sigset[0];
};
/* for KVM_TPR_ACCESS_REPORTING */
struct kvm_tpr_access_ctl {
__u32 enabled;
__u32 flags;
__u32 reserved[8];
};
/* for KVM_SET_VAPIC_ADDR */
struct kvm_vapic_addr {
__u64 vapic_addr;
};
/* for KVM_SET_MP_STATE */
/* not all states are valid on all architectures */
#define KVM_MP_STATE_RUNNABLE 0
#define KVM_MP_STATE_UNINITIALIZED 1
#define KVM_MP_STATE_INIT_RECEIVED 2
#define KVM_MP_STATE_HALTED 3
#define KVM_MP_STATE_SIPI_RECEIVED 4
#define KVM_MP_STATE_STOPPED 5
#define KVM_MP_STATE_CHECK_STOP 6
#define KVM_MP_STATE_OPERATING 7
#define KVM_MP_STATE_LOAD 8
struct kvm_mp_state {
__u32 mp_state;
};
struct kvm_s390_psw {
__u64 mask;
__u64 addr;
};
/* valid values for type in kvm_s390_interrupt */
#define KVM_S390_SIGP_STOP 0xfffe0000u
#define KVM_S390_PROGRAM_INT 0xfffe0001u
#define KVM_S390_SIGP_SET_PREFIX 0xfffe0002u
#define KVM_S390_RESTART 0xfffe0003u
#define KVM_S390_INT_PFAULT_INIT 0xfffe0004u
#define KVM_S390_INT_PFAULT_DONE 0xfffe0005u
#define KVM_S390_MCHK 0xfffe1000u
#define KVM_S390_INT_CLOCK_COMP 0xffff1004u
#define KVM_S390_INT_CPU_TIMER 0xffff1005u
#define KVM_S390_INT_VIRTIO 0xffff2603u
#define KVM_S390_INT_SERVICE 0xffff2401u
#define KVM_S390_INT_EMERGENCY 0xffff1201u
#define KVM_S390_INT_EXTERNAL_CALL 0xffff1202u
/* Anything below 0xfffe0000u is taken by INT_IO */
#define KVM_S390_INT_IO(ai,cssid,ssid,schid) \
(((schid)) | \
((ssid) << 16) | \
((cssid) << 18) | \
((ai) << 26))
#define KVM_S390_INT_IO_MIN 0x00000000u
#define KVM_S390_INT_IO_MAX 0xfffdffffu
struct kvm_s390_interrupt {
__u32 type;
__u32 parm;
__u64 parm64;
};
struct kvm_s390_io_info {
__u16 subchannel_id;
__u16 subchannel_nr;
__u32 io_int_parm;
__u32 io_int_word;
};
struct kvm_s390_ext_info {
__u32 ext_params;
__u32 pad;
__u64 ext_params2;
};
struct kvm_s390_pgm_info {
__u64 trans_exc_code;
__u64 mon_code;
__u64 per_address;
__u32 data_exc_code;
__u16 code;
__u16 mon_class_nr;
__u8 per_code;
__u8 per_atmid;
__u8 exc_access_id;
__u8 per_access_id;
__u8 op_access_id;
__u8 pad[3];
};
struct kvm_s390_prefix_info {
__u32 address;
};
struct kvm_s390_extcall_info {
__u16 code;
};
struct kvm_s390_emerg_info {
__u16 code;
};
struct kvm_s390_mchk_info {
__u64 cr14;
__u64 mcic;
__u64 failing_storage_address;
__u32 ext_damage_code;
__u32 pad;
__u8 fixed_logout[16];
};
struct kvm_s390_irq {
__u64 type;
union {
struct kvm_s390_io_info io;
struct kvm_s390_ext_info ext;
struct kvm_s390_pgm_info pgm;
struct kvm_s390_emerg_info emerg;
struct kvm_s390_extcall_info extcall;
struct kvm_s390_prefix_info prefix;
struct kvm_s390_mchk_info mchk;
char reserved[64];
} u;
};
/* for KVM_SET_GUEST_DEBUG */
#define KVM_GUESTDBG_ENABLE 0x00000001
#define KVM_GUESTDBG_SINGLESTEP 0x00000002
struct kvm_guest_debug {
__u32 control;
__u32 pad;
struct kvm_guest_debug_arch arch;
};
enum {
kvm_ioeventfd_flag_nr_datamatch,
kvm_ioeventfd_flag_nr_pio,
kvm_ioeventfd_flag_nr_deassign,
kvm_ioeventfd_flag_nr_virtio_ccw_notify,
kvm_ioeventfd_flag_nr_fast_mmio,
kvm_ioeventfd_flag_nr_max,
};
#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch)
#define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio)
#define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign)
#define KVM_IOEVENTFD_FLAG_VIRTIO_CCW_NOTIFY \
(1 << kvm_ioeventfd_flag_nr_virtio_ccw_notify)
#define KVM_IOEVENTFD_VALID_FLAG_MASK ((1 << kvm_ioeventfd_flag_nr_max) – 1)
struct kvm_ioeventfd {
__u64 datamatch;
__u64 addr; /* legal pio/mmio address */
__u32 len; /* 1, 2, 4, or 8 bytes; or 0 to ignore length */
__s32 fd;
__u32 flags;
__u8 pad[36];
};
/* for KVM_ENABLE_CAP */
struct kvm_enable_cap {
/* in */
__u32 cap;
__u32 flags;
__u64 args[4];
__u8 pad[64];
};
/* for KVM_PPC_GET_PVINFO */
struct kvm_ppc_pvinfo {
/* out */
__u32 flags;
__u32 hcall[4];
__u8 pad[108];
};
/* for KVM_PPC_GET_SMMU_INFO */
#define KVM_PPC_PAGE_SIZES_MAX_SZ 8
struct kvm_ppc_one_page_size {
__u32 page_shift; /* Page shift (or 0) */
__u32 pte_enc; /* Encoding in the HPTE (>>12) */
};
struct kvm_ppc_one_seg_page_size {
__u32 page_shift; /* Base page shift of segment (or 0) */
__u32 slb_enc; /* SLB encoding for BookS */
struct kvm_ppc_one_page_size enc[KVM_PPC_PAGE_SIZES_MAX_SZ];
};
#define KVM_PPC_PAGE_SIZES_REAL 0x00000001
#define KVM_PPC_1T_SEGMENTS 0x00000002
struct kvm_ppc_smmu_info {
__u64 flags;
__u32 slb_size;
__u32 pad;
struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ];
};
#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0)
#define KVMIO 0xAE
/* machine type bits, to be used as argument to KVM_CREATE_VM */
#define KVM_VM_S390_UCONTROL 1
/* on ppc, 0 indicate default, 1 should force HV and 2 PR */
#define KVM_VM_PPC_HV 1
#define KVM_VM_PPC_PR 2
#define KVM_S390_SIE_PAGE_OFFSET 1
/*
* hsq,ioctls for /dev/kvm fds:也就是系统调用指令
system ioctls系统调用用于控制KVM运行环节的参数，相关工作包括全局性的参数设置和虚拟机创建等工作
KVM_CREATE_VM是其中比较重要的指令字。通过该参数，KVM将返回一个文件描述符，该文件描述符指向内核控件中一个新的虚拟机。
全新创建的虚拟机没有VCPU，也没有内存，需要通过后续的ioctl指令进行配置。使用mmap()系统调用，则会直接返回该虚拟机对应的虚拟内存空间，并且内存的偏移量为0。如果KVM支持KVM_CAP_USER_MEMORY扩展特性，则应使用其他方法。
*/
#define KVM_GET_API_VERSION _IO(KVMIO, 0x00)
#define KVM_CREATE_VM _IO(KVMIO, 0x01) /* returns a VM fd */
#define KVM_GET_MSR_INDEX_LIST _IOWR(KVMIO, 0x02, struct kvm_msr_list)
#define KVM_S390_ENABLE_SIE _IO(KVMIO, 0x06)
/*
* Check if a kvm extension is available. Argument is extension number,
* return is 1 (yes) or 0 (no, sorry).
*/
#define KVM_CHECK_EXTENSION _IO(KVMIO, 0x03)
/*
* Get size for mmap(vcpu_fd)
*/
#define KVM_GET_VCPU_MMAP_SIZE _IO(KVMIO, 0x04) /* in bytes */
#define KVM_GET_SUPPORTED_CPUID _IOWR(KVMIO, 0x05, struct kvm_cpuid2)
#define KVM_TRACE_ENABLE __KVM_DEPRECATED_MAIN_W_0x06
#define KVM_TRACE_PAUSE __KVM_DEPRECATED_MAIN_0x07
#define KVM_TRACE_DISABLE __KVM_DEPRECATED_MAIN_0x08
#define KVM_GET_EMULATED_CPUID _IOWR(KVMIO, 0x09, struct kvm_cpuid2)
/*
* Extension capability list.
*/
#define KVM_CAP_IRQCHIP 0
#define KVM_CAP_HLT 1
#define KVM_CAP_MMU_SHADOW_CACHE_CONTROL 2
#define KVM_CAP_USER_MEMORY 3
#define KVM_CAP_SET_TSS_ADDR 4
#define KVM_CAP_VAPIC 6
#define KVM_CAP_EXT_CPUID 7
#define KVM_CAP_CLOCKSOURCE 8
#define KVM_CAP_NR_VCPUS 9 /* returns recommended max vcpus per vm */
#define KVM_CAP_NR_MEMSLOTS 10 /* returns max memory slots per vm */
#define KVM_CAP_PIT 11
#define KVM_CAP_NOP_IO_DELAY 12
#define KVM_CAP_PV_MMU 13
#define KVM_CAP_MP_STATE 14
#define KVM_CAP_COALESCED_MMIO 15
#define KVM_CAP_SYNC_MMU 16 /* Changes to host mmap are reflected in guest */
#define KVM_CAP_DEVICE_ASSIGNMENT 17
#define KVM_CAP_IOMMU 18
#ifdef __KVM_HAVE_MSI
#define KVM_CAP_DEVICE_MSI 20
#endif
/* Bug in KVM_SET_USER_MEMORY_REGION fixed: */
#define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21
#ifdef __KVM_HAVE_USER_NMI
#define KVM_CAP_USER_NMI 22
#endif
#ifdef __KVM_HAVE_GUEST_DEBUG
#define KVM_CAP_SET_GUEST_DEBUG 23
#endif
#ifdef __KVM_HAVE_PIT
#define KVM_CAP_REINJECT_CONTROL 24
#endif
#define KVM_CAP_IRQ_ROUTING 25
#define KVM_CAP_IRQ_INJECT_STATUS 26
#define KVM_CAP_DEVICE_DEASSIGNMENT 27
#ifdef __KVM_HAVE_MSIX
#define KVM_CAP_DEVICE_MSIX 28
#endif
#define KVM_CAP_ASSIGN_DEV_IRQ 29
/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
#ifdef __KVM_HAVE_MCE
#define KVM_CAP_MCE 31
#endif
#define KVM_CAP_IRQFD 32
#ifdef __KVM_HAVE_PIT
#define KVM_CAP_PIT2 33
#endif
#define KVM_CAP_SET_BOOT_CPU_ID 34
#ifdef __KVM_HAVE_PIT_STATE2
#define KVM_CAP_PIT_STATE2 35
#endif
#define KVM_CAP_IOEVENTFD 36
#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37
#ifdef __KVM_HAVE_XEN_HVM
#define KVM_CAP_XEN_HVM 38
#endif
#define KVM_CAP_ADJUST_CLOCK 39
#define KVM_CAP_INTERNAL_ERROR_DATA 40
#ifdef __KVM_HAVE_VCPU_EVENTS
#define KVM_CAP_VCPU_EVENTS 41
#endif
#define KVM_CAP_S390_PSW 42
#define KVM_CAP_PPC_SEGSTATE 43
#define KVM_CAP_HYPERV 44
#define KVM_CAP_HYPERV_VAPIC 45
#define KVM_CAP_HYPERV_SPIN 46
#define KVM_CAP_PCI_SEGMENT 47
#define KVM_CAP_PPC_PAIRED_SINGLES 48
#define KVM_CAP_INTR_SHADOW 49
#ifdef __KVM_HAVE_DEBUGREGS
#define KVM_CAP_DEBUGREGS 50
#endif
#define KVM_CAP_X86_ROBUST_SINGLESTEP 51
#define KVM_CAP_PPC_OSI 52
#define KVM_CAP_PPC_UNSET_IRQ 53
#define KVM_CAP_ENABLE_CAP 54
#ifdef __KVM_HAVE_XSAVE
#define KVM_CAP_XSAVE 55
#endif
#ifdef __KVM_HAVE_XCRS
#define KVM_CAP_XCRS 56
#endif
#define KVM_CAP_PPC_GET_PVINFO 57
#define KVM_CAP_PPC_IRQ_LEVEL 58
#define KVM_CAP_ASYNC_PF 59
#define KVM_CAP_TSC_CONTROL 60
#define KVM_CAP_GET_TSC_KHZ 61
#define KVM_CAP_PPC_BOOKE_SREGS 62
#define KVM_CAP_SPAPR_TCE 63
#define KVM_CAP_PPC_SMT 64
#define KVM_CAP_PPC_RMA 65
#define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */
#define KVM_CAP_PPC_HIOR 67
#define KVM_CAP_PPC_PAPR 68
#define KVM_CAP_SW_TLB 69
#define KVM_CAP_ONE_REG 70
#define KVM_CAP_S390_GMAP 71
#define KVM_CAP_TSC_DEADLINE_TIMER 72
#define KVM_CAP_S390_UCONTROL 73
#define KVM_CAP_SYNC_REGS 74
#define KVM_CAP_PCI_2_3 75
#define KVM_CAP_KVMCLOCK_CTRL 76
#define KVM_CAP_SIGNAL_MSI 77
#define KVM_CAP_PPC_GET_SMMU_INFO 78
#define KVM_CAP_S390_COW 79
#define KVM_CAP_PPC_ALLOC_HTAB 80
#ifdef __KVM_HAVE_READONLY_MEM
#define KVM_CAP_READONLY_MEM 81
#endif
#define KVM_CAP_IRQFD_RESAMPLE 82
#define KVM_CAP_PPC_BOOKE_WATCHDOG 83
#define KVM_CAP_PPC_HTAB_FD 84
#define KVM_CAP_S390_CSS_SUPPORT 85
#define KVM_CAP_PPC_EPR 86
#define KVM_CAP_ARM_PSCI 87
#define KVM_CAP_ARM_SET_DEVICE_ADDR 88
#define KVM_CAP_DEVICE_CTRL 89
#define KVM_CAP_IRQ_MPIC 90
#define KVM_CAP_PPC_RTAS 91
#define KVM_CAP_IRQ_XICS 92
#define KVM_CAP_ARM_EL1_32BIT 93
#define KVM_CAP_SPAPR_MULTITCE 94
#define KVM_CAP_EXT_EMUL_CPUID 95
#define KVM_CAP_HYPERV_TIME 96
#define KVM_CAP_IOAPIC_POLARITY_IGNORED 97
#define KVM_CAP_ENABLE_CAP_VM 98
#define KVM_CAP_S390_IRQCHIP 99
#define KVM_CAP_IOEVENTFD_NO_LENGTH 100
#define KVM_CAP_VM_ATTRIBUTES 101
#define KVM_CAP_ARM_PSCI_0_2 102
#define KVM_CAP_PPC_FIXUP_HCALL 103
#define KVM_CAP_PPC_ENABLE_HCALL 104
#define KVM_CAP_CHECK_EXTENSION_VM 105
#ifdef KVM_CAP_IRQ_ROUTING
struct kvm_irq_routing_irqchip {
__u32 irqchip;
__u32 pin;
};
struct kvm_irq_routing_msi {
__u32 address_lo;
__u32 address_hi;
__u32 data;
__u32 pad;
};
struct kvm_irq_routing_s390_adapter {
__u64 ind_addr;
__u64 summary_addr;
__u64 ind_offset;
__u32 summary_offset;
__u32 adapter_id;
};
/* gsi routing entry types */
#define KVM_IRQ_ROUTING_IRQCHIP 1
#define KVM_IRQ_ROUTING_MSI 2
#define KVM_IRQ_ROUTING_S390_ADAPTER 3
struct kvm_irq_routing_entry {
__u32 gsi;
__u32 type;
__u32 flags;
__u32 pad;
union {
struct kvm_irq_routing_irqchip irqchip;
struct kvm_irq_routing_msi msi;
struct kvm_irq_routing_s390_adapter adapter;
__u32 pad[8];
} u;
};
struct kvm_irq_routing {
__u32 nr;
__u32 flags;
struct kvm_irq_routing_entry entries[0];
};
#endif
#ifdef KVM_CAP_MCE
/* x86 MCE */
struct kvm_x86_mce {
__u64 status;
__u64 addr;
__u64 misc;
__u64 mcg_status;
__u8 bank;
__u8 pad1[7];
__u64 pad2[3];
};
#endif
#ifdef KVM_CAP_XEN_HVM
struct kvm_xen_hvm_config {
__u32 flags;
__u32 msr;
__u64 blob_addr_32;
__u64 blob_addr_64;
__u8 blob_size_32;
__u8 blob_size_64;
__u8 pad2[30];
};
#endif
#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
/*
* Available with KVM_CAP_IRQFD_RESAMPLE
*
* KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
* the irqfd to operate in resampling mode for level triggered interrupt
* emlation. See Documentation/virtual/kvm/api.txt.
*/
#define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
struct kvm_irqfd {
__u32 fd;
__u32 gsi;
__u32 flags;
__u32 resamplefd;
__u8 pad[16];
};
struct kvm_clock_data {
__u64 clock;
__u32 flags;
__u32 pad[9];
};
#define KVM_MMU_FSL_BOOKE_NOHV 0
#define KVM_MMU_FSL_BOOKE_HV 1
struct kvm_config_tlb {
__u64 params;
__u64 array;
__u32 mmu_type;
__u32 array_len;
};
struct kvm_dirty_tlb {
__u64 bitmap;
__u32 num_dirty;
};
/* Available with KVM_CAP_ONE_REG */
#define KVM_REG_ARCH_MASK 0xff00000000000000ULL
#define KVM_REG_GENERIC 0x0000000000000000ULL
/*
* Architecture specific registers are to be defined in arch headers and
* ORed with the arch identifier.
*/
#define KVM_REG_PPC 0x1000000000000000ULL
#define KVM_REG_X86 0x2000000000000000ULL
#define KVM_REG_IA64 0x3000000000000000ULL
#define KVM_REG_ARM 0x4000000000000000ULL
#define KVM_REG_S390 0x5000000000000000ULL
#define KVM_REG_ARM64 0x6000000000000000ULL
#define KVM_REG_MIPS 0x7000000000000000ULL
#define KVM_REG_SIZE_SHIFT 52
#define KVM_REG_SIZE_MASK 0x00f0000000000000ULL
#define KVM_REG_SIZE_U8 0x0000000000000000ULL
#define KVM_REG_SIZE_U16 0x0010000000000000ULL
#define KVM_REG_SIZE_U32 0x0020000000000000ULL
#define KVM_REG_SIZE_U64 0x0030000000000000ULL
#define KVM_REG_SIZE_U128 0x0040000000000000ULL
#define KVM_REG_SIZE_U256 0x0050000000000000ULL
#define KVM_REG_SIZE_U512 0x0060000000000000ULL
#define KVM_REG_SIZE_U1024 0x0070000000000000ULL
struct kvm_reg_list {
__u64 n; /* number of regs */
__u64 reg[0];
};
struct kvm_one_reg {
__u64 id;
__u64 addr;
};
struct kvm_msi {
__u32 address_lo;
__u32 address_hi;
__u32 data;
__u32 flags;
__u8 pad[16];
};
struct kvm_arm_device_addr {
__u64 id;
__u64 addr;
};
/*
* Device control API, available with KVM_CAP_DEVICE_CTRL
*/
#define KVM_CREATE_DEVICE_TEST 1
//hsq,KVM创建设备数据结构
struct kvm_create_device {
__u32 type; /* in: KVM_DEV_TYPE_xxx */
__u32 fd; /* out: device handle */
__u32 flags; /* in: KVM_CREATE_DEVICE_xxx */
};
//hsq,KVM设备属性
struct kvm_device_attr {
__u32 flags; /* no flags currently defined */
__u32 group; /* device-defined */
__u64 attr; /* group-defined */
__u64 addr; /* userspace address of attr data */
};
#define KVM_DEV_TYPE_FSL_MPIC_20 1
#define KVM_DEV_TYPE_FSL_MPIC_42 2
#define KVM_DEV_TYPE_XICS 3
#define KVM_DEV_TYPE_VFIO 4
#define KVM_DEV_VFIO_GROUP 1
#define KVM_DEV_VFIO_GROUP_ADD 1
#define KVM_DEV_VFIO_GROUP_DEL 2
#define KVM_DEV_TYPE_ARM_VGIC_V2 5
#define KVM_DEV_TYPE_FLIC 6
/*
* hsq,ioctls for VM fds，vm ioctl系统调用实现了对虚拟机的控制。vm ioctl控制指令的参数大多需要从KVM_CREATE_VM中返回的fd文件描述符来进行操作，涉及的操作主要针对某一个虚拟机进行控制，如配置内存、配置VCPU等。
*/
#define KVM_SET_MEMORY_REGION _IOW(KVMIO, 0x40, struct kvm_memory_region)
/*
* KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns
* a vcpu fd.
创建vcpu的指令，返回值为描述符
*/
#define KVM_CREATE_VCPU _IO(KVMIO, 0x41)
#define KVM_GET_DIRTY_LOG _IOW(KVMIO, 0x42, struct kvm_dirty_log)
/* KVM_SET_MEMORY_ALIAS is obsolete: */
#define KVM_SET_MEMORY_ALIAS _IOW(KVMIO, 0x43, struct kvm_memory_alias)
#define KVM_SET_NR_MMU_PAGES _IO(KVMIO, 0x44)
#define KVM_GET_NR_MMU_PAGES _IO(KVMIO, 0x45)
//修改VCPU的内存区域
#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \
struct kvm_userspace_memory_region)
//（Intel架构专用）初始化TSS内存区域
#define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47)
#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO, 0x48, __u64)
/* enable ucontrol for s390 */
struct kvm_s390_ucas_mapping {
__u64 user_addr;
__u64 vcpu_addr;
__u64 length;
};
#define KVM_S390_UCAS_MAP _IOW(KVMIO, 0x50, struct kvm_s390_ucas_mapping)
#define KVM_S390_UCAS_UNMAP _IOW(KVMIO, 0x51, struct kvm_s390_ucas_mapping)
#define KVM_S390_VCPU_FAULT _IOW(KVMIO, 0x52, unsigned long)
/* Device model IOC */
#define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60)
#define KVM_IRQ_LINE _IOW(KVMIO, 0x61, struct kvm_irq_level)
#define KVM_GET_IRQCHIP _IOWR(KVMIO, 0x62, struct kvm_irqchip)
#define KVM_SET_IRQCHIP _IOR(KVMIO, 0x63, struct kvm_irqchip)
#define KVM_CREATE_PIT _IO(KVMIO, 0x64)
#define KVM_GET_PIT _IOWR(KVMIO, 0x65, struct kvm_pit_state)
#define KVM_SET_PIT _IOR(KVMIO, 0x66, struct kvm_pit_state)
#define KVM_IRQ_LINE_STATUS _IOWR(KVMIO, 0x67, struct kvm_irq_level)
#define KVM_REGISTER_COALESCED_MMIO \
_IOW(KVMIO, 0x67, struct kvm_coalesced_mmio_zone)
#define KVM_UNREGISTER_COALESCED_MMIO \
_IOW(KVMIO, 0x68, struct kvm_coalesced_mmio_zone)
#define KVM_ASSIGN_PCI_DEVICE _IOR(KVMIO, 0x69, \
struct kvm_assigned_pci_dev)
#define KVM_SET_GSI_ROUTING _IOW(KVMIO, 0x6a, struct kvm_irq_routing)
/* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */
#define KVM_ASSIGN_IRQ __KVM_DEPRECATED_VM_R_0x70
#define KVM_ASSIGN_DEV_IRQ _IOW(KVMIO, 0x70, struct kvm_assigned_irq)
#define KVM_REINJECT_CONTROL _IO(KVMIO, 0x71)
#define KVM_DEASSIGN_PCI_DEVICE _IOW(KVMIO, 0x72, \
struct kvm_assigned_pci_dev)
#define KVM_ASSIGN_SET_MSIX_NR _IOW(KVMIO, 0x73, \
struct kvm_assigned_msix_nr)
#define KVM_ASSIGN_SET_MSIX_ENTRY _IOW(KVMIO, 0x74, \
struct kvm_assigned_msix_entry)
#define KVM_DEASSIGN_DEV_IRQ _IOW(KVMIO, 0x75, struct kvm_assigned_irq)
#define KVM_IRQFD _IOW(KVMIO, 0x76, struct kvm_irqfd)
#define KVM_CREATE_PIT2 _IOW(KVMIO, 0x77, struct kvm_pit_config)
//设置系统启动的VCPU号，默认为0
#define KVM_SET_BOOT_CPU_ID _IO(KVMIO, 0x78)
#define KVM_IOEVENTFD _IOW(KVMIO, 0x79, struct kvm_ioeventfd)
#define KVM_XEN_HVM_CONFIG _IOW(KVMIO, 0x7a, struct kvm_xen_hvm_config)
#define KVM_SET_CLOCK _IOW(KVMIO, 0x7b, struct kvm_clock_data)
#define KVM_GET_CLOCK _IOR(KVMIO, 0x7c, struct kvm_clock_data)
/* Available with KVM_CAP_PIT_STATE2 */
#define KVM_GET_PIT2 _IOR(KVMIO, 0x9f, struct kvm_pit_state2)
#define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2)
/* Available with KVM_CAP_PPC_GET_PVINFO */
#define KVM_PPC_GET_PVINFO _IOW(KVMIO, 0xa1, struct kvm_ppc_pvinfo)
/* Available with KVM_CAP_TSC_CONTROL */
#define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2)
#define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3)
/* Available with KVM_CAP_PCI_2_3 */
#define KVM_ASSIGN_SET_INTX_MASK _IOW(KVMIO, 0xa4, \
struct kvm_assigned_pci_dev)
/* Available with KVM_CAP_SIGNAL_MSI */
#define KVM_SIGNAL_MSI _IOW(KVMIO, 0xa5, struct kvm_msi)
/* Available with KVM_CAP_PPC_GET_SMMU_INFO */
#define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info)
/* Available with KVM_CAP_PPC_ALLOC_HTAB */
#define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32)
#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce)
/* Available with KVM_CAP_RMA */
#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma)
/* Available with KVM_CAP_PPC_HTAB_FD */
#define KVM_PPC_GET_HTAB_FD _IOW(KVMIO, 0xaa, struct kvm_get_htab_fd)
/* Available with KVM_CAP_ARM_SET_DEVICE_ADDR */
#define KVM_ARM_SET_DEVICE_ADDR _IOW(KVMIO, 0xab, struct kvm_arm_device_addr)
/* Available with KVM_CAP_PPC_RTAS */
#define KVM_PPC_RTAS_DEFINE_TOKEN _IOW(KVMIO, 0xac, struct kvm_rtas_token_args)
/* ioctl for vm fd */
#define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device)
/* ioctls for fds returned by KVM_CREATE_DEVICE */
#define KVM_SET_DEVICE_ATTR _IOW(KVMIO, 0xe1, struct kvm_device_attr)
#define KVM_GET_DEVICE_ATTR _IOW(KVMIO, 0xe2, struct kvm_device_attr)
#define KVM_HAS_DEVICE_ATTR _IOW(KVMIO, 0xe3, struct kvm_device_attr)
/*
*hsq, ioctls for vcpu fds,vcpu ioctl系统调用主要针对具体的每一个虚拟的vCPU进行配置，包括寄存器读/写、中断设置、内存设置、调试开关、时钟管理等功能，能够对KVM的虚拟机进行精确的运行时配置。
对于一个VM的CPU来说，寄存器控制是最重要的一个环节，vcpu ioctl在寄存器控制方面提供了丰富的指令字
*/
//KVM_RUN和KVM_CREATE_VCPU是vm ioctl系统调用的两个重要指令字。在通过KVM_CREATE_VCPU为VM虚拟机创建VCPU，并且获得VCPU对应的fd文件描述符之后，可以进行KVM_RUN启动虚拟机的操作。
//KVM_RUN指令字虽然没有任何参数，但是在调用KVM_RUN启动了虚拟机之后，可以通过mmap()系统调用映射VCPU的fd所在的内存空间来获得kvm_run结构体信息。该结构体位于内存偏移量0，结束位置在KVM_GET_ VCPU_MMAP_SIZE指令所返回的大小中。
#define KVM_RUN _IO(KVMIO, 0x80)
//获取通用寄存器信息
#define KVM_GET_REGS _IOR(KVMIO, 0x81, struct kvm_regs)
#define KVM_SET_REGS _IOW(KVMIO, 0x82, struct kvm_regs)
#define KVM_GET_SREGS _IOR(KVMIO, 0x83, struct kvm_sregs)
#define KVM_SET_SREGS _IOW(KVMIO, 0x84, struct kvm_sregs)
//将VCPU的物理地址翻译成host主机中的物理地址
#define KVM_TRANSLATE _IOWR(KVMIO, 0x85, struct kvm_translation)
//通过插入一个中断向量，在VCPU上产生中断(当APIC无效时)
#define KVM_INTERRUPT _IOW(KVMIO, 0x86, struct kvm_interrupt)
/* KVM_DEBUG_GUEST is no longer supported, use KVM_SET_GUEST_DEBUG instead */
#define KVM_DEBUG_GUEST __KVM_DEPRECATED_VCPU_W_0x87
#define KVM_GET_MSRS _IOWR(KVMIO, 0x88, struct kvm_msrs)
#define KVM_SET_MSRS _IOW(KVMIO, 0x89, struct kvm_msrs)
//设置VCPU的CPUID信息
#define KVM_SET_CPUID _IOW(KVMIO, 0x8a, struct kvm_cpuid)
//设置某一个VCPU的中断信号屏蔽
#define KVM_SET_SIGNAL_MASK _IOW(KVMIO, 0x8b, struct kvm_signal_mask)
#define KVM_GET_FPU _IOR(KVMIO, 0x8c, struct kvm_fpu)
#define KVM_SET_FPU _IOW(KVMIO, 0x8d, struct kvm_fpu)
#define KVM_GET_LAPIC _IOR(KVMIO, 0x8e, struct kvm_lapic_state)
#define KVM_SET_LAPIC _IOW(KVMIO, 0x8f, struct kvm_lapic_state)
#define KVM_SET_CPUID2 _IOW(KVMIO, 0x90, struct kvm_cpuid2)
#define KVM_GET_CPUID2 _IOWR(KVMIO, 0x91, struct kvm_cpuid2)
/* Available with KVM_CAP_VAPIC */
#define KVM_TPR_ACCESS_REPORTING _IOWR(KVMIO, 0x92, struct kvm_tpr_access_ctl)
/* Available with KVM_CAP_VAPIC */
#define KVM_SET_VAPIC_ADDR _IOW(KVMIO, 0x93, struct kvm_vapic_addr)
/* valid for virtual machine (for floating interrupt)_and_ vcpu */
#define KVM_S390_INTERRUPT _IOW(KVMIO, 0x94, struct kvm_s390_interrupt)
/* store status for s390 */
#define KVM_S390_STORE_STATUS_NOADDR (-1ul)
#define KVM_S390_STORE_STATUS_PREFIXED (-2ul)
#define KVM_S390_STORE_STATUS _IOW(KVMIO, 0x95, unsigned long)
/* initial ipl psw for s390 */
#define KVM_S390_SET_INITIAL_PSW _IOW(KVMIO, 0x96, struct kvm_s390_psw)
/* initial reset for s390 */
#define KVM_S390_INITIAL_RESET _IO(KVMIO, 0x97)
#define KVM_GET_MP_STATE _IOR(KVMIO, 0x98, struct kvm_mp_state)
#define KVM_SET_MP_STATE _IOW(KVMIO, 0x99, struct kvm_mp_state)
/* Available with KVM_CAP_NMI */
#define KVM_NMI _IO(KVMIO, 0x9a)
/* Available with KVM_CAP_SET_GUEST_DEBUG */
#define KVM_SET_GUEST_DEBUG _IOW(KVMIO, 0x9b, struct kvm_guest_debug)
/* MCE for x86 */
#define KVM_X86_SETUP_MCE _IOW(KVMIO, 0x9c, __u64)
#define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO, 0x9d, __u64)
#define KVM_X86_SET_MCE _IOW(KVMIO, 0x9e, struct kvm_x86_mce)
/* IA64 stack access */
#define KVM_IA64_VCPU_GET_STACK _IOR(KVMIO, 0x9a, void *)
#define KVM_IA64_VCPU_SET_STACK _IOW(KVMIO, 0x9b, void *)
/* Available with KVM_CAP_VCPU_EVENTS */
//获取VCPU中被挂起待延时处理的信号，如中断、NMI和异常
#define KVM_GET_VCPU_EVENTS _IOR(KVMIO, 0x9f, struct kvm_vcpu_events)
//设置VCPU的信号，如中断、NMI和异常
#define KVM_SET_VCPU_EVENTS _IOW(KVMIO, 0xa0, struct kvm_vcpu_events)
/* Available with KVM_CAP_DEBUGREGS */
#define KVM_GET_DEBUGREGS _IOR(KVMIO, 0xa1, struct kvm_debugregs)
#define KVM_SET_DEBUGREGS _IOW(KVMIO, 0xa2, struct kvm_debugregs)
/*
* vcpu version available with KVM_ENABLE_CAP
* vm version available with KVM_CAP_ENABLE_CAP_VM
*/
#define KVM_ENABLE_CAP _IOW(KVMIO, 0xa3, struct kvm_enable_cap)
/* Available with KVM_CAP_XSAVE */
#define KVM_GET_XSAVE _IOR(KVMIO, 0xa4, struct kvm_xsave)
#define KVM_SET_XSAVE _IOW(KVMIO, 0xa5, struct kvm_xsave)
/* Available with KVM_CAP_XCRS */
#define KVM_GET_XCRS _IOR(KVMIO, 0xa6, struct kvm_xcrs)
#define KVM_SET_XCRS _IOW(KVMIO, 0xa7, struct kvm_xcrs)
/* Available with KVM_CAP_SW_TLB */
#define KVM_DIRTY_TLB _IOW(KVMIO, 0xaa, struct kvm_dirty_tlb)
/* Available with KVM_CAP_ONE_REG */
#define KVM_GET_ONE_REG _IOW(KVMIO, 0xab, struct kvm_one_reg)
#define KVM_SET_ONE_REG _IOW(KVMIO, 0xac, struct kvm_one_reg)
/* VM is being stopped by host */
#define KVM_KVMCLOCK_CTRL _IO(KVMIO, 0xad)
#define KVM_ARM_VCPU_INIT _IOW(KVMIO, 0xae, struct kvm_vcpu_init)
#define KVM_ARM_PREFERRED_TARGET _IOR(KVMIO, 0xaf, struct kvm_vcpu_init)
#define KVM_GET_REG_LIST _IOWR(KVMIO, 0xb0, struct kvm_reg_list)
#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1)
#define KVM_DEV_ASSIGN_MASK_INTX (1 << 2)
//kvm分配pci设备
struct kvm_assigned_pci_dev {
__u32 assigned_dev_id;
__u32 busnr;
__u32 devfn;
__u32 flags;
__u32 segnr;
union {
__u32 reserved[11];
};
};
#define KVM_DEV_IRQ_HOST_INTX (1 << 0)
#define KVM_DEV_IRQ_HOST_MSI (1 << 1)
#define KVM_DEV_IRQ_HOST_MSIX (1 << 2)
#define KVM_DEV_IRQ_GUEST_INTX (1 << 8)
#define KVM_DEV_IRQ_GUEST_MSI (1 << 9)
#define KVM_DEV_IRQ_GUEST_MSIX (1 << 10)
#define KVM_DEV_IRQ_HOST_MASK 0x00ff
#define KVM_DEV_IRQ_GUEST_MASK 0xff00
struct kvm_assigned_irq {
__u32 assigned_dev_id;
__u32 host_irq; /* ignored (legacy field) */
__u32 guest_irq;
__u32 flags;
union {
__u32 reserved[12];
};
};
struct kvm_assigned_msix_nr {
__u32 assigned_dev_id;
__u16 entry_nr;
__u16 padding;
};
#define KVM_MAX_MSIX_PER_DEV 256
//kvm分配的msi入口
struct kvm_assigned_msix_entry {
__u32 assigned_dev_id;
__u32 gsi;
__u16 entry; /* The index of entry in the MSI-X table */
__u16 padding[3];
};
#endif /* __LINUX_KVM_H */
原文链接：https://www.cnblogs.com/hsqdboke/p/4166713.html
本文来源 爱码网，其版权均为 原网址 所有 与本站无关，文章内容系作者个人观点，不代表 本站 对观点赞同或支持。如需转载，请注明文章来源。
相关文章
